首页

山东行业资讯

当前位置: 首页>>新闻中心>>山东行业资讯

山东汽车滤清器(链板线)装配线技术参考案例

一、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线设计依据:


1、本产品尺寸:长×宽×高=5500×294×650mm;

2、本产品更大负载重量:40kg/米;

3、电源:单相220V;三相380V;

4、环境条件:湿度60%,温度: -10℃-40℃。


二、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线体主要配置及技术参数:


1、此板链线长5500mm,线体总宽294mm,线体输送面高度650mm;

2、 此线体机架采用江苏华西村牌40*40铝型材,动力架采用上海宝钢40*40mm方管焊接和3mm铁板折弯制成,表面喷塑处理,用于固定电机、驱动链轮等线体动力部分配件; 

3、输送链板尺寸为200mm*50mm,采用上海宝钢2mm优质冷板折弯制成,表面镀锌处理;

4、输送链条为宁波动力链条,节距为P=50.8mm;

5、线体上层导轨采用40*63角铁,下层导轨采用5#角铁;

6、线体侧封板采用上海宝钢2mm铁板折弯制成;

7、电机采用0.4KW晟邦一体机,松下变频器变频调速,调速范围0.5-5m/min。


三、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线体主要技术要求:


1、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线体:主体支架要求拼接正规;

2、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线体:结构结实耐用,外观整洁美观;电器控制准确灵敏;

3、汽车滤清器(山东链板线,山东链板流水线,山东链板输送线)山东装配线体:碳钢部分表面喷塑,其余铁质配件为电脑色。


1. Design basis for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):




1. The size of this product: length×width×height=5500×294×650mm;


2. The maximum load weight of this product: 40kg/m;


3. Power supply: single-phase 220V; three-phase 380V;


4. Environmental conditions: humidity 60%, temperature: -10℃-40℃.




2. The main configuration and technical parameters of the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):




1. The length of the plate chain is 5500mm, the total width of the line body is 294mm, and the height of the line body conveying surface is 650mm;


2. The wire frame is made of 40*40 aluminum profile of Jiangsu famous brand Huaxi Village brand, and the power frame is made of Shanghai Baosteel 40*40mm square tube welding and 3mm iron plate bending, and the surface is sprayed with plastic to fix the motor and drive. Sprocket and other line body power part accessories;


3. The size of the conveyor chain plate is 200mm*50mm, which is made of 2mm high-quality cold plate of Shanghai Baosteel, and the surface is galvanized;


4. The conveying chain is a Ningbo power chain with a pitch of P=50.8mm;


5. The upper guide rail of the line body adopts 40*63 angle iron, and the lower guide rail adopts 5# angle iron;


6. The side sealing plate of the wire body is made by bending 2mm iron plate of Shanghai Baosteel;


7. The motor adopts 0.4KW Shengbang integrated machine, Panasonic inverter frequency conversion speed regulation, and the speed regulation range is 0.5-5m/min.




3. The main technical requirements for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):




1. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: the main body bracket requires regular splicing;


2. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: strong and durable structure, neat and beautiful appearance; accurate and sensitive electrical control;


3. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: part of the surface of carbon steel is sprayed with plastic, and the rest of the iron parts are computer-colored.



服务区域: 安徽 北京 重庆 江苏 山东 上海 天津 浙江 石家庄 廊坊 沈阳 大连 长春 南京 无锡 徐州 常州 苏州 南通 杭州 合肥 芜湖 福州 厦门 济南 青岛 郑州 武汉 长沙 成都 西安