1 泰州流水线,泰州自动化流水线,泰州组装线,泰州自动组装线规格: L6000*W1780*H2000(mm)(一般根据客户需求定制。
Automation technology is widely used in industry, agriculture, military, scientific research, transportation, commerce, medical care, services and households. The use of automation technology can not only liberate people from heavy physical labor and part of mental labor, as well as harsh and dangerous working environments, but also expand the functions of human organs, greatly increase labor productivity, and enhance human understanding of the world and transform the world. ability.
Assembly line, automatic assembly line, assembly line, automatic assembly line: the parameters of the circular assembly line are as follows:
1 Assembly line, automatic assembly line, assembly line, automatic assembly line specifications: L6000*W1780*H2000 (mm) (generally customized according to customer needs.
2. Assembly line, automatic assembly line, assembly line, automatic assembly line. The main body of the assembly line is made of 40*40*1.5mm (thick) iron square pass, which is installed every 2 meters.
3. Reinforcing ties are made of 25*25 iron square pass, one on each side.
4. The bladder and spleen are made of 40*60*1.5mm flat pass.
6. Ф38 galvanized drum is used as supporting tooling and conveying medium, every 100mm*1.
7. The lamp holder is made of 40*40*1.5mm square pass, and one piece is installed every 2 meters.
8, assembly line, automatic assembly line, assembly line, automatic assembly line lighting part adopts 40W*48""Qili" double light tube with cover *8 sets, with 25*50 lamp trough and wire
9. The work guide bookshelf adopts H-shaped special aluminum trough, with 1 piece of 300*400 green transparent acrylic board per meter. A total of 12 sets
10 The power socket adopts the multifunctional "Bodi" brand two-position three-pin socket*10 sets, 5 sets each, and 0.8mm zinc plate is cut and folded to make the trunking and wires.
11. Tooling board 600mm*600mm*14 sets.
12. ①The first layer of the double-layer tooling board is circular, with a diameter of 500, with a 16mm thick board surface pasted with anti-static (0.2mm thick) rubber, and the next layer is a square 600mm*600mm with a white fireproof board on a 18mm wooden surface. A layer of 1.2mm thick zinc plate on the bottom face towel.
· ②The main body of the tooling adopts a high-density turntable with bearing positioning parts. The upper and lower tooling plates are surrounded by green T-shaped rubber edges.
③The tooling plate can be positioned after 90 rotations, and it can be rotated 360 at the same time.
· Bull's eye table * 2 sets (specification L1780mm*W640mm*H750mm). Use a 40*40 square pass as the base frame, and pave a 2..0mm iron plate with a "bull's eye" pattern on the iron plate, and install one every 100mm in the longitudinal direction, covering the eye table.