一、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线设计依据:
1、本产品尺寸:长×宽×高=5500×294×650mm;
2、本产品更大负载重量:40kg/米;
3、电源:单相220V;三相380V;
4、环境条件:湿度60%,温度: -10℃-40℃。
二、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线体主要配置及技术参数:
1、此板链线长5500mm,线体总宽294mm,线体输送面高度650mm;
2、 此线体机架采用江苏华西村牌40*40铝型材,动力架采用上海宝钢40*40mm方管焊接和3mm铁板折弯制成,表面喷塑处理,用于固定电机、驱动链轮等线体动力部分配件;
3、输送链板尺寸为200mm*50mm,采用上海宝钢2mm优质冷板折弯制成,表面镀锌处理;
4、输送链条为宁波动力链条,节距为P=50.8mm;
5、线体上层导轨采用40*63角铁,下层导轨采用5#角铁;
6、线体侧封板采用上海宝钢2mm铁板折弯制成;
7、电机采用0.4KW晟邦一体机,松下变频器变频调速,调速范围0.5-5m/min。
三、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线体主要技术要求:
1、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线体:主体支架要求拼接正规;
2、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线体:结构结实耐用,外观整洁美观;电器控制准确灵敏;
3、汽车滤清器(镇江链板线,镇江链板流水线,镇江链板输送线)镇江装配线体:碳钢部分表面喷塑,其余铁质配件为电脑色。
1. Design basis for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):
1. The size of this product: length×width×height=5500×294×650mm;
2. The maximum load weight of this product: 40kg/m;
3. Power supply: single-phase 220V; three-phase 380V;
4. Environmental conditions: humidity 60%, temperature: -10℃-40℃.
2. The main configuration and technical parameters of the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):
1. The length of the plate chain is 5500mm, the total width of the line body is 294mm, and the height of the line body conveying surface is 650mm;
2. The wire frame is made of 40*40 aluminum profile of Jiangsu famous brand Huaxi Village brand, and the power frame is made of Shanghai Baosteel 40*40mm square tube welding and 3mm iron plate bending, and the surface is sprayed with plastic to fix the motor and drive. Sprocket and other line body power part accessories;
3. The size of the conveyor chain plate is 200mm*50mm, which is made of 2mm high-quality cold plate of Shanghai Baosteel, and the surface is galvanized;
4. The conveying chain is a Ningbo power chain with a pitch of P=50.8mm;
5. The upper guide rail of the line body adopts 40*63 angle iron, and the lower guide rail adopts 5# angle iron;
6. The side sealing plate of the wire body is made by bending 2mm iron plate of Shanghai Baosteel;
7. The motor adopts 0.4KW Shengbang integrated machine, Panasonic inverter frequency conversion speed regulation, and the speed regulation range is 0.5-5m/min.
3. The main technical requirements for the assembly line of automobile filters (chain plate line, chain plate assembly line, chain plate conveyor line):
1. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: the main body bracket requires regular splicing;
2. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: strong and durable structure, neat and beautiful appearance; accurate and sensitive electrical control;
3. Automobile filter (chain plate line, chain plate assembly line, chain plate conveyor line) assembly line body: part of the surface of carbon steel is sprayed with plastic, and the rest of the iron parts are computer-colored.
服务区域: 安徽 北京 重庆 江苏 山东 上海 天津 浙江 石家庄 廊坊 沈阳 大连 长春 南京 无锡 徐州 常州 苏州 南通 杭州 合肥 芜湖 福州 厦门 济南 青岛 郑州 武汉 长沙 成都 西安